FedHill USA – The Leader of Copper-Nickel Brake, Fuel & Hydraulic Lines

Fedhill Brake lines, American and Metric brake line nuts with SAE and DIN flares

When that Routine Brake Job turns Into a Nightmare of Rusted Brake Lines, Impossible to Find Brake Line Fittings and Unreliable Flaring Tools, You’ve Come to the Right Place

Cunifer™ copper-nickel brake line is completely rustproof, and once it’s installed, your lines will never have to be replaced again. Unlike steel lines, it bends and flares with ease, making the job go fast and smooth.

High performance manufacturers including Aston Martin, Porsche, Volvo and Audi choose copper-nickel alloy over all other materials, including stainless steel.

Cunifer™ is the highest quality copper-nickel tubing available. For over 20 years, FedHill has been the exclusive importer of the original Cunifer™ tubing made in Britain. It is a seamless alloy that -

  • Is DOT approved and exceeds the SAE specification J1640 for copper-nickel tubing
  • Is completely corrosion proof
  • Is easier to bend, flare and install than steel tubing
  • And has a 5 to 1 safety factor!

Fedhill Brake Line Out-Brakes the Competition!

 Fedhill Brake Line compared against competition

We have been providing the finest quality brake line products available to both manufacturers and individuals since 1995. Since then, the marketplace has been flooded with cheaper imitations. Customers calling with problems using the imitation tubing alerted us to investigate the competition. If you’ve been looking at the lower priced competition, please take the time to consider why our tubing is more expensive and how that benefits you.

We purchased samples of their tubing to find out what the problem was, and discovered the competitions claims are as flimsy as their tubing. The bare minimum SAE specification for wall thickness is .025”, but their tubing measured at .022”. Some mechanics have even reported a wall thickness of only .019”! The fact that it is nowhere near specification is alarming.

There’s between 28% to over 45% MORE metal in our tube than theirs. This is how the best of the U.S. Corporate competition measures up, and there’s also the tubing made in Mexico, China and India that’s flooding the marketplace.

Our tubing is not made to the bare minimum specification. Cunifer™ is manufactured to a tighter tolerance and exceeds the minimum SAE specifications, resulting in safe, reliable and truly high quality tubing.

Are you Fed Up with your Flaring Tool?

Our 007 brake line flaring tools easy cam and lever operation can make flares in 30 seconds, saving you time and frustration.

The 007 Brake Line Flaring Tool is what you need.

007 Brake Line Flaring Tool

This tool is 12 pounds of steel in a compact, clever arrangement that makes flaring brake lines amazingly easy.

Using its fast cam and lever action, you can press a perfect double flare in 30 seconds and quickly change flare sizes if you need to.

Its precision made punch and smooth bore die blocks grip and form the flare without damaging the tubing.

With this tool, you can make aircraft quality flares for SAE 45 degree double (inverted) on American or metric sized tubing, DIN flares on metric tubing, and British bubble flares.

We have purchased and tested almost every brake line flaring tool on the market. The 007 is the finest, most reliable tool we have ever used. Our shop has been using this tool for 20 years, and we are quite proud to represent the manufacturer and have the honor of supplying this tool to you.

We Stock the Hard to Find Nuts Fittings and Tee’s you need to Get your Vehicle Back on the Road Again

From vintage Ferrari to modern metric, British Whitworth threads, and a multitude of SAE/American brake line nuts including master cylinder nuts, we have the nuts you need! We also carry tee's, unions, bleeders and adaptors for brake line locks, brake proportioning valves and AN hydraulic brake tubing nuts.

If you have any Questions or Need Technical Help, Please Read Through our Technical Help Page

Replacing brake lines on a modern vehicle really is a nightmare. You have our sympathy and support in sorting out the mess! If our web resources don't answer your questions or you have a "you can't get there from here" situation with your plumbing, please feel free to contact us.

Shops, Wholesalers, Schools and Military personnel please call for pricing.

Mastercard, Visa, American Express Discover, PayPal and MasterPass payments accepted

Articles & Links:

Article-Copper-nickel automotive vehicle brake tubing

A review of the history and performance of copper-nickel brake tubing.

Article-Automotive hydraulic brake tube: The case for 90/10 copper-nickel tubing

Recent tests prove that 90/10 copper-nickel tube (UNS C70600) is superior to steel tubes when run through over 120 cycles (includes test results, pictures).